On the Subject of Aquariums

If there is magic on this planet, it is contained in water.

The module displays a 6×6 grid divided into blocks called “tanks”.

You have to “fill” the tanks with water up to a certain level or leave it empty.

The water level in each tank is one and the same across its full width.

The numbers outside the grid show the number of cells filled with water horizontally and vertically. Not all numbers are given.

All the tanks with water (in blue) and all the tanks with air (in white) must be toggled. Click on a square to cycle it between unfilled, water, and air.

If you wish to reset the puzzle, you may press the red button.

The module will disarm once all the appropriate cells have been filled in with either water or air.

Interactive Controls

• In Read mode:
  • Type in the row and column clues. Type 0/Space to leave it blank.
  • Click on the walls between squares to toggle them.
  • Or Click on a cell to select it and use the arrow keys or WASD keys to toggle the walls around the selected cell.
• In Solve mode:
  • Click on a cell to cycle its state between water, air, or empty.
  • Press W, A, E/Space/Enter to set the selected cell state.
  • The Reset button (↻) will clear the grid, not the walls.
• In Generated mode:
  • Press the Manual button to switch to Generated mode.
  • Have fun solving the generated puzzle!
  • Use the Size buttons (or type - and +) to adjust the size of the grid. (Puzzle will have to be regenerated.)
  • The Solution button will show the solution to the generated puzzle.
• The Save button creates a new save state.
• The sound effects can be muted.
• The Reset Saves button clears all the saved states.
• The Reset All button resets the entire interactive.