On the Subject of Dual Buttons

Big talking, big buttons.

There are two buttons; a PRESS button and a SUBMIT button.

The PRESS button must be pressed a specific amount of times before pressing the submit button.

Use STEP ONE to determine which button is the PRESS button and which is the SUBMIT button.

Use STEP TWO to determine how many times the PRESS button needs to be pressed.

STEP ONE:

• Follow these rules in the order they are listed and perform the first action that applies.
• The PRESS button will be the button stated in the rules below, The other one is the SUBMIT button.

If both buttons are yellow, the left is the PRESS button.

Otherwise, if exactly one button is red and the sum of the first two digits of the serial number is greater than 10, the red button is the PRESS button.

Otherwise, if either of the buttons are green and the last digit of the serial number is greater than 4, the right button is the PRESS button.

Otherwise, if the left button is blue, the left button is the PRESS button.

Otherwise, if either of the buttons are yellow, the right button is the PRESS button.

Otherwise, the left button is the PRESS button.

STEP TWO:

• Go through the rules below and press the PRESS button the specified amount of times for each rule.
• After that, press the SUBMIT button.
• If you press the PRESS button wrong amount of times, you will receive a strike. Any presses on the PRESS button will be reset.

If the SUBMIT button is yellow, press the PRESS button once.

If there is a module on the bomb containing the word “Wires”, press the PRESS button twice.

If the PRESS button is green, press the PRESS button twice.

If either one of the buttons are red, press the PRESS button once.

If the left button is yellow, press the PRESS button once.

If the right button is blue, press the PRESS button once.

If there are two buttons on the module, press the PRESS button once.